Installation Guides
      Back to home
      1. Help Center
      2. Installation & Support
      3. Installation Guides

      Installation Guide: WOOD Bathroom Furniture

      How to correctly assemble bathroom furniture

      CUBRO bathroom furniture, in both WOOD and LACQUER finishes, shares a mounting system designed for easy installation. While they follow a similar general structure, there are key differences in the following aspects:

      • Cut-out of the first drawer: the WOOD model has no cut-out, allowing for greater storage capacity. It requires a straight siphon, such as the RÄNNILEN model from IKEA.

      • Wall-mounting brackets.

      • Drawer and front panel adjustment systems.

      Par_60_Sin_Roble_Square_Roble-1200x780

      Before you begin

      • Hire a professional to install water inlets and drains.

      • The wall must be reinforced.

      • Secure the unit firmly to the wall to ensure stability and safety.

      • Do not mix components between collections, as the fixing and adjustment systems differ.

      Required tools and materials

      Before you start, make sure you have the following tools (not included):

      • Drill

      • Screws and wall plugs to fix to the wall

      • Screwdriver

      • Spirit level

      • Hammer

      • Pencil

      • Measuring tape

      Wall brackets are included, but differ depending on the range.


      Installation

      1. Fixing the unit to the wall

      • Mark the bracket positions on the wall with a pencil. The correct measurement is the total width of the unit minus 38 mm.

      • Drill the holes and insert plugs and screws.

      • Hang the unit (without drawers) on the brackets. To remove it, press the shaft release hole.

      2. Adjusting the unit and drawers

      • Use a screwdriver to adjust the unit’s position.

      • Drawers come pre-assembled but may need fine adjustment.

      • The front fixing system allows simple adjustments without special tools.

      • To remove the front panel, simply press the PRESS button.

      3. Installing the basin

      Integrated basin:

      • Apply silicone to the top edges of the unit.

      • Place the basin and let it dry.

      Countertop basin:

      • Make the drain hole (see the cut-out guide).

      • Position the countertop and fix it using the included screws.

       

       

      👉 Click here for instructions for LACA Bathroom Furniture

       

       

      ❌ Products not included

      • Tap: universal. Choose whichever you prefer, depending on whether the basin requires a deck-mounted or wall-mounted tap.

      • Siphon: we recommend a straight model from IKEA, as the drawer does not have a cut-out like other bathroom units.

      • Waste or plug: universal, but check compatibility with the basin’s hole diameter (Ø). We recommend an IKEA model.

       

      📥 Download this WOOD bathroom furniture installation guide